Precision Welding Services
AWS-certified welders executing GMAW, GTAW, SMAW, FCAW, and robotic GMAW across steel, aluminum, titanium, MIL-spec armor plate, Inconel, Hastelloy, and exotic alloys. Multi-pass, thick-section, and high-spec weldments for defense, aerospace, and critical industry.
High-deposition MIG welding on carbon steel, stainless, and aluminum. Standard and pulse MIG capability for improved weld quality and reduced spatter. Primary production process.
Precision TIG welding for high-quality weld appearance, exotic materials, and thin sections. AC/DC capability for aluminum and steel. Used on titanium, Inconel, stainless, and precision fabrications.
Stick welding for structural and heavy repair work. Well-suited for outdoor, field, and position welding where shielding gas is not practical. Available on engine-driven field unit.
High-deposition flux-cored welding for heavy structural fabrication and thick-section work. Strong penetration on carbon steel and higher-strength alloys. Effective for out-of-position welding.
Advanced pulse control for improved weld quality, reduced heat input, and lower spatter. Ideal for aluminum, stainless, and applications where weld appearance and consistency are critical.
Automated robotic MIG and pulse MIG welding cell for production runs requiring consistent weld quality, reduced variation, and improved throughput. See Robotic Welding →
Qualified Codes
| AWS D1.1 | Structural Welding — Steel |
| AWS D1.2 | Structural Welding — Aluminum |
| AWS D17.1 | Fusion Welding for Aerospace |
| ASME Section IX | Boiler & Pressure Vessel Welding |
| MIL-STD-3040A | Qualified Procedures & Qualified Welding Personnel |
| WPS / PQR | Qualified Procedures, Supported by United Technical |
Personnel
Runs under our ISO 9001:2015-certified QMS with documented procedures and records. Every weldment is inspected by an AWS Certified Welding Inspector before shipment, against applicable drawing, workmanship, code, and customer requirements. Quality & Inspection →
Have a Welding Project?
Send us your drawings and specifications. We'll tell you straight whether we're the right fit and what it takes to get it done.